Body Electrical System
Parking Assist Sensor Repair Procedures
In this manual: Body Electrical System
6steps
~36min
2/5difficulty
Done 0 of 6
Removal
- Disconnect the negative (-) battery terminal.
- Remove the front/rear bumper cover. (Refer to Body - "Front Bumper Cover") (Refer to Body - "Rear Bumper Cover")
- Disconnect the connector (A) from the ultrasonic sensor. [Front sensor, rear center sensor]
[Rear side sensor]
- Remove the ultrasonic sensor (A) by opening the sensor holder. [Front sensor, rear center sensor]
[Rear side sensor]
Installation
- Install the PAS sensor and connector.
- Install the front/rear bumper cover.
Test yourself
A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?