Body Electrical System
Power Window Motor Repair Procedures
In this manual: Body Electrical System
9steps
~54min
2/5difficulty
Done 0 of 9
Inspection
Front Power Window Motor- Disconnect the negative (-) battery terminal.
- Remove the front door trim panel. (Refer to Body - "Front Door Trim")
- Disconnect the connector (A) from the motor. (A: Safety, B: Standard)
- Connect the motor terminals directly to battery voltage (12 V) and check that the motor operates smoothly. Then reverse the polarity and check that the motor operates smoothly in the opposite direction. If operation is abnormal, replace the motor. [Standard Window Motor]
- Connect terminals No. 2 and No. 3 to battery voltage (12 V) and check that the motor operates smoothly when connected to the following terminals. [Safety Window Motor]
- Disconnect the negative (-) battery terminal.
- Remove the rear door trim panel. (Refer to Body - "Rear Door Trim")
- Disconnect the connector (A) from the motor.
- Connect the motor terminals directly to battery voltage (12 V) and verify that the motor operates smoothly. Then reverse the polarity and verify that the motor operates smoothly in the reverse direction. If operation is abnormal, replace the motor.
Test yourself
A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?