Kia Soul EV Owner's Manual Quiz
Heating, Ventilation, and Air Conditioning

PWM Blower Module Repair Procedures

In this manual: Heating, Ventilation, and Air Conditioning
General Information — 17Maintenance — 17Drive Shaft and Axle — 15Suspension System — 36Steering — 24Restraints — 48Brake System — 37Body (Interior and Exterior) — 207Body Electrical System — 203Heating, Ventilation, and Air Conditioning — 80Electric Vehicle Battery System — 115
7steps
~42min
2/5difficulty
Done 0 of 7

Inspection

  1. Turn the ignition off.
  2. Manually operate the control switch and measure the voltage of the blower motor.
  3. Select the control switch to raise the voltage to high speed.

Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the glove box housing. (Refer to Body - "Glove Box Housing")
  3. Disconnect the connector (A), then remove the blower resistor (B) after loosening the mounting screws.
  4. Install in the reverse order of removal.

Test yourself

A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.