Body (Interior and Exterior)

Rear Door Outside Handle Repair Procedures

5steps
~30min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Replacement

  1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim")
  2. Remove the hole plug (A).
  3. After loosening the mounting bolt, remove the rear door outside handle cover (B).

    Tightening torque: 7.8 ~ 11.8 N·m

  4. Remove the rear door outside handle (A) by sliding it rearward.
  5. Install in the reverse order of removal.
    • Make sure to install the outside handle escutcheon (A) between the outside handle and the door panel.
    • Make sure the door locks/unlocks and opens/closes properly.

Test yourself

A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.