Kia Soul EV Owner's Manual Quiz
Body (Interior and Exterior)

Rocker Panel Molding Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 17Maintenance — 17Drive Shaft and Axle — 15Suspension System — 36Steering — 24Restraints — 48Brake System — 37Body (Interior and Exterior) — 207Body Electrical System — 203Heating, Ventilation, and Air Conditioning — 80Electric Vehicle Battery System — 115
3steps
~18min
2/5difficulty
Done 0 of 3

Replacement
  • Wear gloves to protect your hands.
  • Using a flat-tip screwdriver, wrap protective tape around the tip and apply protective tape around the relevant parts to prevent damage.
  • Be careful not to scratch the body surface.
  1. Loosen the rocker panel molding retaining screws.
  2. Using a screwdriver or trim tool, remove the rocker panel molding (A).
  3. Install in the reverse order of removal.
    • Replace all damaged clips.

Test yourself

A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.