Specifications and Consumer Information
Tires and Wheels
In this manual: Specifications and Consumer Information
~1min read

*1: Load Index
*2: Speed Symbol
*3: Normal Load: up to 3 persons
*4: Applies to all-wheel drive vehicle with Lambda II PE 3.3 L T-GDI.
CAUTION
When replacing tires, use tires of the same size as those originally supplied with the vehicle. Using tires of a different size may cause damage to related parts or cause them to malfunction.
✽ NOTICE
- You may add 21 kPa (3 psi) to the standard tire pressure if lower temperatures are expected in the near future. Tire pressure drops approximately 7 kPa (1 psi) for every 11°C (12°F) drop in temperature. If extreme temperature changes are expected, recheck the tire pressure as necessary to keep the tires properly inflated.
- When replacing tires, we recommend using the same tires as original equipment on the vehicle. Otherwise, handling performance may be affected.
- When driving at high altitudes, atmospheric pressure naturally decreases. Therefore, check the tire pressure and add more air if necessary. Additionally, the required tire pressure increase per km above sea level is: 10.5 kPa (1.5 psi)/km
- Speed over 160 km/h For driving at a maximum speed exceeding 160 km/h, pay attention to and, if necessary, adjust the tire pressure for speeds exceeding 160 km/h from the table above. Otherwise, tire damage and accidents may occur.
Test yourself
A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?