Kia Cee'd Quiz
Manual Transmission

Back-up Light Switch Repair Procedures

In this manual: Manual Transmission
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
8steps
~48min
2/5difficulty
02040608010058.843N·mlb·ft
Tightening torque found on this page
Done 0 of 8

Inspection

  1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner")
  2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery")
  3. Disconnect the back-up light switch connector (A).
  4. Check the continuity of the circuit between the power terminal and the signal terminal.

    Specification: approx. less than 1 ohm

Removal

  1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner")
  2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery")
  3. Disconnect the back-up light switch connector (A).
  4. Remove the back-up light switch (A).

    Tightening torque: 39.2 ~ 59 N·m

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.