Kia Cee'd Quiz
Drive Shaft and Axle

BJ Boot Repair Procedures

In this manual: Drive Shaft and Axle
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
6steps
~36min
2/5difficulty
Done 0 of 6

Replacement

  1. Remove the front drive shaft. (Refer to Drive Shaft Assembly - "Front Drive Shaft")
  2. Remove the TJ joint assembly. (Refer to Drive Shaft Assembly - "TJ Joint")
  3. Remove the dynamic damper. (Refer to Drive Shaft Assembly - "Dynamic Damper")
  4. Using pliers or a flat-tip (-) screwdriver, remove the BJ boot bands (A).
  5. Remove the BJ boot.
  6. Install in the reverse order of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.