Kia Cee'd Quiz
Heating, Ventilation, and Air Conditioning

Blower Resistor (Manual) Repair Procedures

In this manual: Heating, Ventilation, and Air Conditioning
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
5steps
~30min
2/5difficulty
Done 0 of 5

Inspection

  1. Measure the resistance between the terminals.
  2. If the measured resistance does not meet the specification, replace the blower resistor. (After removal of the resistor.)

Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Disconnect the connector (A) and remove the blower resistor (B) after loosening the mounting screws.
  3. Install in the reverse order of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.