Body Electrical System
Windshield Wiper and Washer Switch Repair Procedures
In this manual: Body Electrical System
10steps
~60min
3/5difficulty
Done 0 of 10
Inspection
Check the continuity of the circuit between the terminals while operating the wiper and washer switch. If it is not normal, replace the wiper and washer switch.




Removal
- Remove the lower/upper steering column shroud panel. (Refer to Body - "Steering Column Shroud Panel")
- Disconnect the connector (A).

- If it is necessary to remove only the wiper and washer switch (A), release the wiper switch lock using a tool without removing the steering wheel and clock spring.

- Remove the steering wheel. (Refer to Steering System - "Steering Wheel")
- Remove the clock spring. (Refer to Restraint System - Driver Airbag (DAB) and Clock Spring)
- Remove the multifunction switch assembly (A) after loosening the 2 screws.

Installation
- Install the multifunction switch after connecting the connector.
- Install the clock spring and steering wheel.
- Install the upper and lower shrouds.
- Install the steering wheel.
Test yourself
A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?