Instrument Cluster Configuration

1. Connect the M-MDS (IDS) to the DLC-2.

2. After the vehicle is identified, select the following items from the initialization screen of the IDS.

• Select the “Module Programming”.

3. Then, select items from the screen menu in the following order.

1. 1

   Select “Programmable Module Installation”.

2. 2

   Select “IC”.

4. Perform the configuration according to the directions on the screen.

5. Retrieve DTCs by the M-MDS (IDS), then verify that there is no DTC present.

• If a DTC (s) is detected, perform the applicable DTC inspection..