Mazda 3 Quiz
Body

Rear Beltline Molding Removal/Installation

In this manual: Body
Vehicle general — 15Accessories — 111Body — 339Brakes — 71Drivetrain — 143Electrical — 58Engine — 251HVAC — 72Restraints — 15Steering — 32Suspension — 41
~1min read

1. Fully open the rear door glass.

2. Remove the rear door trim..

3. Remove clip A using a fastener remover and pull up the rear beltline molding in the direction of the arrow (1) shown in the figure.

4. Remove clip B using a fastener remover and pull up the rear beltline molding in the direction of the arrow (2) shown in the figure.

5. Rotate the rear beltline molding in the direction of the arrow (3) shown in the figure and remove it while detaching tabs C.


6. Install in the reverse order of removal.

Test yourself

A quick Mazda 3 quiz: every answer comes with an explanation and a link to the manual page.