Body
Side Panel Removal/Installation
In this manual: Body
~1min read
1. Insert a tape-wrapped fastener remover into the position indicated by the arrow in the figure.
2. Pull the side panel in the direction of the arrow shown in the figure, then remove the clips and hook.

3. Pull the side panel in the direction of the arrow shown in the figure, while detaching the guides.

CAUTION:
When pulling out the side panel, be careful not to damage the guide.
4. Install in the reverse order of removal.
Test yourself
A quick Mazda 3 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?