Braking system

Abs (abs/tcs) or dsc hu/cm configuration

~1min read

1. Connect the WDS or equivalent to the DLC-2.


2. Input vehicle information following the direction on the WDS or equivalent screen.

3. Select Module programming.

4. Select Programmable module installation.

5. Select ABS/TCS.

6. Retrieve DTCs by the WDS or equivalent, then verify that there is no DTC present.

  • If DTC is present, perform applicable DTC inspection.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.