Body electrical system
Condenser removal/installation
In this manual: Body electrical system
~1min read
4SD




1. Disconnect the negative battery cable.
2. Remove the rear package trim.
3. Remove in the order indicated in the table.


4. Install in the reverse order of removal.
5HB1. Disconnect the negative battery cable.
2. Remove the liftgate lower trim.
3. Remove in the order indicated in the table.


4. Install in the reverse order of removal.
Test yourself
A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?