Mazda 6 Quiz
Body

Front seat disassembly/assembly

In this manual: Body
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read
Warning
  • Handling the front seat (side air bag) improperly can accidentally deploy the side air bag, which may seriously injure you. Read AIR BAG SYSTEM SERVICE WARNINGS before handling the front seat. (See SERVICE WARNINGS.)

1. Disconnect the negative battery cable and wait for more than 1 minute.

2. Remove the side air bag module. (See SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)

3. Disassemble in the order indicated in the table.

4. Assemble in the reverse order of disassembly.

Driver's Seat (Normal Seat)


Driver's Seat (Power Seat)


Passenger's Seat Warning
  • Do not disassemble the seat cushion. Doing so will necessitate reassembly which may damage or press the occupancy sensor. This will cause the misoperation of the air bag system, which may seriously injure you.


Lumber support lever disassembly note

Remove the pin from the lumber support lever installation part with rag.


Recliner dial disassembly note

Remove the pin from the recliner dial installation part with rag.


Side cover disassembly note

1. Remove the screws.

2. Disengage the clips.

3. Lift the side cover up in the direction of the arrow, then unhook it from slide adjuster.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.