Mazda 6 Quiz
Body

Glass panel adjustment

In this manual: Body
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Fully close the glass panel.

2. Measure the gap and height between the glass panel and body.

3. If not as specified, loosen the glass panel installation screws and reposition the glass panel.

Clearance
a: -0.8-1.2 mm {-0.032-0.047 in} b: 0 mm {0 in}

4. Tighten the installation screws.



5. Insert a prepaid card between the weatherstrip and the body of the vehicle. Verify that the sunroof is shut tightly (there is resistance when the prepaid card is moved).

  • If the sunroof is not shut tightly, readjust by performing Steps 3 and 4.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.