Body
Sunroof motor inspection
In this manual: Body
~1min read
Motor


Limit Switch

1. Remove the sunroof motor.
2. Apply battery positive voltage to the sunroof motor terminals and inspect the operation of the sunroof motor.
- If not as specified, replace the sunroof motor.


Limit Switch
1. Remove the headliner. (See HEADLINER REMOVAL/INSTALLATION.)
2. Verify the glass panel position.
3. Disconnect the connector.
4. Inspect for continuity between the sunroof motor terminals using an ohmmeter.
- If not as specified, replace the sunroof motor.


Test yourself
A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?