Load Cover

WARNING

The load cover is not a restraint system. Secure cargo located beneath the load cover properly with suitable equipment. Make sure the load cover is properly locked. Objects that are not adequately secured can be thrown into the passenger compartment over the backrest, for example in the event of hard braking, sudden changes of direction or an accident. You could then cause an accident and injure yourself or other persons.

When loading the vehicle, make sure not to exceed the lower edge of the side windows. Do not place any objects on the load cover. When removing and installing the load cover, make sure that the load cover ends do not rub against light-colored trim parts.

The load cover is mounted behind the rear seat backrests.

Extending and Retracting the Load Cover

• Extending: pull the load cover rearward by handle 1 and hook it onto the left and right mounts 2.
• Retracting: unhook the load cover from the left and right mounts 2 and guide it forward using handle 1 until it is fully retracted.

Removing and Installing the Load Cover

• Removing: make sure the load cover is retracted.
• Push the end of load cover 1 on the right or left side in the direction of the arrow using handle 3.
• Push load cover 1 into the opposite anchor point 2.
• Remove load cover 1 upward.
• Installing: insert load cover 1 into the right or left anchor point 2.
• Push the opposite end of load cover 1 in the direction of the arrow and insert load cover 1 into the other anchor point 2.