Airbags and belt tensioners
Deactivation and reactivation
In this manual: Airbags and belt tensioners
~1min read
DEACTIVATION
- Switch off the ignition and remove the key.
- Wait a few minutes.
- Disconnect the battery.
- Wait at least 1 minute before any work to allow the control module to deactivate.
- Discharge static electricity by touching a bodywork ground.
REACTIVATION
The area around airbags and pyrotechnic belt tensioners must be clear, with no objects or occupants.- Connect all components of the airbag system.
- Reconnect the battery.
- Driver side, door open, switch on the ignition while keeping clear of the deployment zone.
Test yourself
A quick Mercedes-Benz B-Class quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?