Ventilation, Heater & Air Conditioner
Additional Service When Replacing A/c Auto Amp.
In this manual: Ventilation, Heater & Air Conditioner
~1min read
Description
After replaced A/C auto amp. it is necessary to perform control unit configuration with CONSULT. For details, refer to Work Procedure.
AFTER REPLACEMENT
Work Procedure
REPLACE A/C AUTO AMP.
Replace A/C auto amp. Refer to Removal and Installation.
>>GO TO 2.
WRITING vehicle SPECIFICATION
Perform configuration (HVAC). Refer to Description.
>>WORK END
Was this page helpful?