Ventilation, Heater & Air Conditioner
Configuration (a/c Auto Amp.)
In this manual: Ventilation, Heater & Air Conditioner
~1min read
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the A/C auto amp.
The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the A/C auto amp.
Refer to Work Procedure.
The configuration no need to “save” configuration data from the A/C auto amp. The configuration data is always generated freshly at the server and then downloaded to the CONSULT.
Work Procedure
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specification to A/C auto amp. following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.
>>WORK END
Was this page helpful?