Body Exterior, Doors, Roof & Vehicle Security
Anti-Pinch Inspection
In this manual: Body Exterior, Doors, Roof & Vehicle Security
8steps
~48min
3/5difficulty
Done 0 of 8
Description
Check anti-pinch function when the initialization of moonroof and sunshade system is performed. Refer to Work Procedure.
Work Procedure
CHECK ANTI-PINCH FUNCTION
Fully open the moonroof.
Place a piece of wood near the fully closed position.
Close the moonroof completely with auto closed.
Check that moonroof opens for approximately 145 mm (5.71 in) without pinching a piece of wood and stops.
Fully open the sunshade.
Place a piece of wood near fully closed position.
Close the sunshade completely with auto closed.
Check that sunshade opens for approximately 145 mm (5.71 in) without pinching a piece of wood and stops.
Is the inspection result normal?
YES>>END
NO>>Perform initialization procedure. Refer to Description.
Was this page helpful?