Transmission & Driveline

Differential Assembly

~2min read

Exploded View

Bracket Side oil seal Rear final drive assembly
Differential lock position switch Rear cover Gasket
Drain plug Stud bolt Filler plug
O-ring
: N·m (kg-m, in-lb)
: N·m (kg-m, ft-lb)
: Always replace after every disassembly.
: Apply gear oil.
: Apply Genuine Liquid Gasket, Three Bond 1217 or equivalent. Refer to Recommended Chemical Products and Sealants.

Disassembly and Assembly

DISASSEMBLY

Remove bracket from rear final drive assembly.

Remove drain plug and gasket from rear cover and drain gear oil.

Remove filler plug and gasket from rear cover.

Remove differential lock position switch. Refer to Removal and Installation.

Remove the side oil seals. Refer to Removal and Installation.

Remove rear cover mounting bolts () and remove the rear cover .

Remove stud bolt from rear cover.

ASSEMBLY

Install stud bolt to rear cover.

  • For tightening torque, refer to Exploded View.

Apply liquid gasket to mating surface of rear cover.

  • For applying liquid gasket, refer to Exploded View.

Install rear cover, and tighten rear cover mounting bolts to the specified torque.

  • For tightening torque, refer to Exploded View.

Bolt symbol
Number of bolt 5 5
Bolt size M12 M10

Install the side oil seals. Refer to Removal and Installation.

Install differential lock position switch. Refer to Removal and Installation.

Install drain plug, as per the following procedure.Install gasket to drain plug, and then install them to rear cover.

Tighten drain plug to the specified torque.
  • For tightening torque, refer to Exploded View.

Install filler plug, as per the following procedure.Install gasket to filler plug, and then install them to rear cover.

Tighten filler plug to the specified torque.
  • For tightening torque, refer to Exploded View.

Install bracket, and tighten bracket mounting bolts to the specified torque.

  • For tightening torque, refer to Exploded View.