Transmission & Driveline
Differential Lock Position Switch
In this manual: Transmission & Driveline
~1min read
Exploded View

| Rear final drive assembly | Differential lock position switch | ||||
| O-ring | |||||
Removal and Installation
REMOVAL
Ignition switch OFF.
Disconnect negative battery terminal.
Disconnect the differential lock position switch harness connector.
Remove differential lock position switch mounting bolt (
) and remove differential lock position switch
.
Rotate differential lock position switch counterclockwise then pull out to remove as shown.

INSTALLATION
Install in the reverse order of removal.
Was this page helpful?