Driver Information & Multimedia

Display

5steps
~30min
2/5difficulty
Done 0 of 5

Diagnosis and Repair Work Flow

Work Flow

DETAILED FLOW

INTERVIEW FOR MALFUNCTION

It is also important to clarify the customer concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.

>>

GO TO 2.

SELF-DIAGNOSIS WITH CONSULT

With CONSULT

Perform self-diagnosis of “Display unit” using CONSULT. Refer to CONSULT Function.

Is any DTC detected?

YES>>

GO TO 3.

NO>>

GO TO 4.

TROUBLE DIAGNOSIS FOR DTC

  1. Check the DTC indicated in the “Self Diagnostic Result”.

  2. Perform the relevant diagnosis referring to the DTC Index. Refer to DTC Index.

>>

GO TO 5.

SYMPTOM DIAGNOSIS

Perform the applicable diagnosis according to the diagnosis chart by symptom. Refer to Symptom Table.

>>

GO TO 5.

MALFUNCTIONING PART REPAIR

Repair or replace the identified malfunctioning parts.

>>

GO TO 6.

REPAIR CHECK 1

With CONSULT

  1. Erases self-diagnosis results.

  2. Perform self-diagnosis of “Display unit” again after repairing or replacing the specific items.

  3. Check if any DTC is detected in self-diagnosis results of “Display unit” .

Is any DTC detected?

YES>>

GO TO 3.

NO>>

GO TO 7.

REPAIR CHECK 2

Check that the malfunction symptom is solved or no other symptoms occur.

Is there a malfunction symptom?

YES>>

GO TO 4.

NO>>

INSPECTION END

Additional Service When Replacing Display Unit

Work Procedure

Description

Vehicle specification needs to be written with CONSULT because it is not written after replacing the display unit. For details the operation, refer to "CONSULT Operation Manual".

Work Procedure [Display Unit]

WRITING VEHICLE SPECIFICATION

With CONSULT

Perform writing vehicle specification to the display unit according to "Replace ECU" in CONSULT Operation Manual.

>>

WORK END