Transmission & Driveline

Front Wheel Hub and Knuckle

~1min read

Inspection

COMPONENT PART

Make sure that the mounting conditions (looseness, backlash) of each component and component conditions (wear, damage) are normal.

WHEEL HUB ASSEMBLY (BEARING-INTEGRATED TYPE)

Check the following items, and replace the part if necessary.

  • Move wheel hub and bearing assembly in the axial direction by hand. Check there is no looseness of wheel bearing.

    Axial end play : Refer to Wheel Bearing.
  • Rotate wheel hub and make sure there is no unusual noise or other irregular conditions. If there is any of irregular conditions, replace wheel hub and bearing assembly.