Electrical & Power Control
Inverter Unit
In this manual: Electrical & Power Control
~1min read
Exploded View

| Bracket LH | Inverter unit | Bracket RH | |||
| :N·m (kg-m, in-lb) | |||||
Removal and Installation
REMOVAL
Remove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect inverter unit harness connector.
Remove inverter unit mounting nuts.
Remove the bracket from the inverter unit if necessary.
INSTALLATION
Note the following, and install in the reverse order of removal.
To install mounting nuts of inverter unit, referring tightening to the specified torque to the numerical order shown in the figure.

| Specified torque | : 1 → 2 → 3 → 4 | ||||
| : vehicle front | |||||
Was this page helpful?