Third Seatback
Disassembly and Assembly
DISASSEMBLY
Disengage fixing pawls using a remover tool (A), and then remove tether anchor finisher.

| : Pawl |
Disengage seatback trim fixing dual lock fastener
.
LH seat

RH seat

Open seatback trim fixing fasteners
.
LH seat

RH seat

Disengage seatback trim fixing clips.
LH seat


: Clip RH seat


: Clip
Remove seat cushion frame assembly. Refer to Disassembly and Assembly.
Remove snap pin.

| : vehicle front |
Remove outer and center headrest.
Remove headrest holders by raising it while pinching pawls from the bottom of headrest holders.

Remove seatback trim and pad as a set from seatback frame assembly.
Remove hog rings, and then separate seatback trim and pad.
Remove reclining cable (manual seat).Remove fixing screw
, and then remove reclining strap.


LH seat

RH seat


Remove fixing clip, and then remove arm cover (LH and RH).

| : Clip |
Remove third seat control unit from seatback frame assembly (power seat). Refer to Removal and Installation.
ASSEMBLY
Note the following items, and then install in the reverse order of removal.