Transmission & Driveline
Transfer Control Unit
In this manual: Transmission & Driveline
~1min read
Exploded View

| Transfer control unit | |||||
| : N·m (kg-m, in-lb) |
Removal and Installation
REMOVAL
The ignition switch OFF.
Disconnect negative battery terminal. Refer to Removal and Installation.
Remove glove box cover. Refer to Removal and Installation.
Disconnect transfer control unit harness connector.
Remove transfer control unit bracket mounting nuts (
) and remove transfer control unit
with bracket.

INSTALLATION
Note the following, and install in the reverse order of removal.
When replacing transfer control unit, performe writing unit parameter and intial calibration. Refer to Description.
Was this page helpful?