Driveline transfer: TY21B
4WD warning lamp blinks slowly
In this manual: Driveline transfer: TY21B
~1min read
Description
4WD warning lamp blinks at approximately 2 seconds intervals while driving.
Diagnosis Procedure
1.CHECK TIRECheck the following.
• Tire pressure
• Wear condition
• Front and rear tire size (There is no difference between front and rear tires.)
Is the inspection result normal? YES >> GO TO 2.
NO >> Repair or replace error-detected parts. And then, drive the vehicle at speed of 20 km/h or more for 5 seconds or more. Improper size information is initialized accordingly.
2.TERMINAL INSPECTIONCheck 4WD control unit harness connector for disconnection.
Is the inspection result normal? YES >> Replace 4WD control unit. Refer to DLN-91, "Removal and Installation".
NO >> Repair or replace the error-detected parts.
Was this page helpful?