Driveline transfer: TY21B
4WD warning lamp does not turn off
In this manual: Driveline transfer: TY21B
~1min read
Description
4WD warning lamp does not turn OFF several seconds after the engine started.
Diagnosis Procedure
1.PERFORM SELF-DIAGNOSIS
With CONSULT-III
Perform self-diagnosis for “ALL MODE AWD/4WD”.
Is any DTC detected? YES >> Check the DTC. Refer to DLN-33, "DTC Index".
NO >> GO TO 2.
2.CHECK 4WD WARNING LAMPPerform the trouble diagnosis of the 4WD warning lamp. Refer to DLN-80, "Diagnosis Procedure".
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace the error-detected parts.
3.CHECK 4WD CONTROL MODULE POWER SUPPLY AND GRAUND CIRCUITPerform the trouble diagnosis of power supply and ground circuit. Refer to MWI-51, "COMBINATION METER : Diagnosis Procedure".
Is the inspection result normal? YES >> Check each harness connector pin terminal for malfunction or disconnection.
NO >> Repair or replace the error-detected parts.
Was this page helpful?