Driveline transfer: TY21B
Vehicle does not enter 4WD mode
In this manual: Driveline transfer: TY21B
~1min read
Description
Vehicle does not enter 4-wheel drive mode even though 4WD warning lamp turned to OFF.
Diagnosis Procedure
1.CHECK 4WD WARNING LAMPTurn the ignition switch ON.
Does 4WD warning lamp turn ON? YES >> GO TO 2.
NO >> Proceed to diagnosis procedure. Refer to DLN-80, "Diagnosis Procedure".
2.CHECK PARKING BRAKE SWITCH SIGNAL
With CONSULT-III
Check “PKB SW” of CONSULT-III “DATA MONITOR” for “ALL MODE AWD/4WD”.

Is the inspection result normal? YES >> GO TO 3.
NO >> Proceed to diagnosis procedure. Refer to BRC-208, "Diagnosis Procedure".
3.CRUISE TESTDrive the vehicle for a period of time.
Does any symptom occur? YES >> Replace electric controlled coupling for mechanical malfunction (mechanical engagement of clutch is not possible). Refer to DLN-139, "Removal and Installation".
NO >> Check each harness connector pin terminal for disconnection.
Was this page helpful?