Heater & Air Conditioning Control System Type 3
A/C control
In this manual: Heater & Air Conditioning Control System Type 3
~1min read
Exploded View

1. Intake door cable 2. Mode door cable
3. A/C control
4. Air mix door cable
5. Intake door lever knob
A. To mode door link
B. To intake door link
C. To air mix door link
Removal and Installation
REMOVAL
1. Remove A/C finisher. Refer to IP-13, "Removal and Installation".2. Remove A/C control fixing screws (A) and fixing pawls, and then remove A/C control.
Pawl

3. Disconnect door cable and harness connector from A/C control.
INSTALLATION
Install in the reverse order of removal.
Was this page helpful?