Heater & Air Conditioning Control System Type 3
Blower fan resistor
In this manual: Heater & Air Conditioning Control System Type 3
~1min read
Exploded View

1. A/C unit assembly 2. Blower fan resistor*1 3. Sub harness*1
4. Power transistor*2
5. Sub harness*2
6. Blower motor
• *1: Manual air conditioner • *2: Automatic air conditioner
Removal and Installation
REMOVAL
1. Remove instrument panel assembly. Refer to IP-13, "Removal and Installation". (LHD models) 2. Remove glove box assembly. Refer to IP-13, "Removal and Installation". (RHD models)3. Disconnect blower fan resistor harness connector.
4. Remove fixing screws, and then remove blower fan resistor from A/C unit assembly.
INSTALLATION
Install in the reverse order of removal.
Was this page helpful?