Brake Control System with ESP

ABS actuator and electric unit (control unit)

In this manual: Brake Control System with ESP
Foreword — 1General information — 45Engine Mechanical MR16DDT — 61Engine Mechanical HR16DE — 52Engine Mechanical K9K — 46Engine Lubrication System MR16DDT — 18Engine Lubrication System HR16DE — 14Engine Lubrication System K9K — 11Engine Cooling System MR16DDT — 28Engine Cooling System HR16DE — 29Engine Cooling System K9K — 24Engine Control System MR16DDT — 163Engine Control System HR16DE — 115Engine Control System K9K — 129Fuel System MR16DDT — 13Fuel system HR16DE — 11Fuel system K9K — 12Exhaust system MR16DDT — 7Exhaust system HR16DE — 10Exhaust system K9K — 7Starting system — 24Accelerator control system — 6Clutch — 25Driveline transfer: TY21B — 77Driveline rear propeller Shaft: 3Fφ16-ETJ75 — 12Driveline rear final drive: RTVS — 31Transaxle & transmission 5MT: RS5F92R — 31Transaxle & transmission 6MT: RS6F94R — 30Transaxle & transmission CVT: RE0F10B — 93Transaxle & transmissioN CVT: RE0F11A — 103Front Axle MR16DDT — 18Front Axle HR16DE — 17Front Axle K9K — 17Rear Axle 2WD — 6Rear Axle 4WD — 13Front Suspension — 21Rear Suspension 2WD — 13Rear Suspension 4WD — 17Road Wheels & Tires — 6Brake System LHD — 24Brake System RHD — 24Parking Brake System — 8Brake Control System without ESP — 44Brake Control System with ESP — 63Steering System — 14Steering Control System — 27Seat Belt — 8SRS Airbag — 24SRS Airbag Control System — 93Ventilation System — 11Heater & Air Conditioning System HR16DE — 28Heater & Air Conditioning System MR16DDT — 28Heater & Air Conditioning Control System Type 1 — 49Heater & Air Conditioning Control System Type 2 — 51Heater & Air Conditioning Control System Type 3 — 32Heater & Air Conditioning Control System Type 4 — 40Heater & Air Conditioning Control System Type 5 — 21Interior — 16Instrument Panel — 10Seat — 18Door & Lock Type 1 — 83Door & Lock type 2 — 80Door & Lock type 3 — 65Door & Lock type 4 — 60Security Control System with intelligent key system — 82Security Control System without intelligent key system — 41Glass & Window System — 15Power Window Control System — 28Body Repair — 13Exterior — 20Mirrors — 26Exterior Lighting System Halogen type — 51Interior Lighting System — 24Wiper & Washer — 45Defogger — 31Horn — 4Power Outlet — 4Body Control System With intelligent key system — 21Body Control System Without intelligent key system — 23LAN system can fundamental — 6LAN system can — 31LAN System can system (type 1) — 1LAN System can system (type 2) — 1LAN System can system (type 3) — 1LAN System can system (type 4) — 1LAN System can system (type 5) — 1LAN System can system (type 6) — 1LAN System can system (type 7) — 2LAN System can system (type 8) — 1LAN System can system (type 9) — 1LAN System can system (type 10) — 1LAN System can system (type 11) — 1Power Control System IPDM E/R (with I-key) — 14Power Control System IPDM E/R (without I-key) — 14Power Control System Power distribution system — 25Charging System — 22Power Supply, Ground & Circuit Elements — 20Meter, Warning Lamp & Indicator — 33Warning Chime System — 22Audio, Visual & Navigation System Audio without navigation — 30Audio, Visual & Navigation System Audio with navigation — 33Audio, Visual & Navigation System NISSAN dynamic control system — 22Cruise Control System — 1Drive Mode System — 10Maintenance — 14
~3min read

Exploded View

LHD

MR16DDT (2WD), HR16DE

1. ABS actuator and electric unit (control

1. ABS actuator and electric unit (control unit)
2. ABS actuator and electric unit (control unit) harness connector
3. Bracket

A. To front LH caliper B. To rear RH caliper
C. To rear LH caliper
D. To front RH caliper
E. To master cylinder secondary side F. To master cylinder primary side

: N·m (kg-m, ft-lb): Vehicle front
: N·m (kg-m, in-lb): N·m (kg-m, ft-lb)
MR16DDT (4WD): N·m (kg-m, in-lb)


MR16DDT (4WD)

1. ABS actuator and electric unit (control

1. ABS actuator and electric unit (control unit)
2. ABS actuator and electric unit (control unit) harness connector
3. Bracket

A. To front LH caliper B. To rear RH caliper
C. To rear LH caliper
D. To front RH caliper
E. To master cylinder secondary side F. To master cylinder primary side

: N·m (kg-m, ft-lb): Vehicle front
: N·m (kg-m, in-lb): N·m (kg-m, ft-lb)
K9K: N·m (kg-m, in-lb)


K9K

1. ABS actuator and electric unit (control

1. ABS actuator and electric unit (control unit)
2. ABS actuator and electric unit (control unit) harness connector
3. Bracket

A. To front LH caliper B. To rear RH caliper
C. To rear LH caliper
D. To front RH caliper
E. To master cylinder secondary side F. To master cylinder primary side

: N·m (kg-m, ft-lb): Vehicle front
: N·m (kg-m, in-lb): N·m (kg-m, ft-lb)
RHD: N·m (kg-m, in-lb)


RHD

1. ABS actuator and electric unit (control

1. ABS actuator and electric unit (control unit)
2. ABS actuator and electric unit (control unit) harness connector
3. Bracket

A. To master cylinder secondary side B. To master cylinder primary side C. To front LH caliper
D. To rear RH caliper
E. To rear LH caliper
F. To front RH caliper

: N·m (kg-m, ft-lb): Vehicle front
: N·m (kg-m, in-lb): N·m (kg-m, ft-lb)
Removal and Install: N·m (kg-m, in-lb)


Removal and Install

REMOVAL

1. Disconnect battery cable from negative terminal.

2. Drain brake fluid.

• LHD: Refer to BR-12, "Draining".

• RHD: Refer to BR-80, "Draining".

3. Remove air cleaner case and air duct. (RHD) Refer to EM-161, "Removal and Installation".

4. Disconnect ABS actuator and electric unit (control unit) harness connector (1), follow the procedure described below.

a. Push the pawl (A). b. Move the lever (B) in the direction (C) until locked.

c. Disconnect ABS actuator and electric unit (control unit) harness connector.

5. Loosen flare nut of brake tube using a flare nut wrench, and then remove brake tube from ABS actuator and electric unit (control unit).

• LHD Refer to BR-24, "FRONT : Exploded View".

• RHD Refer to BR-91, "FRONT : Exploded View"

6. Remove ABS actuator and electric unit (control unit) and bracket.

6. Remove ABS actuator and electric unit (control unit) and bracket.

CAUTION:
• Never remove and never install ABS actuator and electric unit (control unit) by holding harness connector.

• Be careful not to drop ABS actuator and electric unit (control unit) and apply excessive impact to it.

7. Remove bracket and bushing from ABS actuator and electric unit (control unit).

INSTALLATION

Note the following, and install in the reverse order of removal.

• When replacing with a new ABS actuator and electric unit (control unit), never remove the protector of the brake tube mounting hole until right before the brake tube is installed.

• When installing brake tube, tighten to the specified torque using a flare nut torque wrench so that flare nut and brake tube are not damaged.

- LHD: Refer to BR-24, "FRONT : Exploded View".

- RHD: Refer to BR-91, "FRONT : Exploded View".

• Never remove and install ABS actuator and electric unit (control unit) by holding actuator harness.

• Bleed air from brake piping after installation.

- LHD: Refer to BR-13, "Bleeding Brake System".

- RHD: Refer to BR-81, "Bleeding Brake System".

• Never apply excessive impact to actuator, such as by dropping it.

• After installing the ABS actuator and electric unit (control unit) harness connector (1), move the lever (A) in the direction (B) to secure the locking.

Yaw rate/side/decel G sensor