Brake Control System with ESP
Yaw rate/side/decel G sensor
In this manual: Brake Control System with ESP
~1min read
Exploded View

1. Yaw rate/side/decel G sensor 2. Yaw rate/side/decel G sensor harness connector
3. Bracket
: Vehicle front
: N·m (kg-m, in-lb)
Removal and Installation
REMOVAL
CAUTION:Never drop or strike yaw rate/side/decel G sensor, because it has little endurance to impact. Never use a pneumatic tool.
1. Remove front seat (right side).
• 2WD: Refer to SE-19, "Removal and Installation".• 4WD: Refer to SE-27, "Removal and Installation".
2. Remove floor carpet. Refer to INT-23, "Removal and Installation". 3. Disconnect yaw rate/side/decel G sensor harness connector.4. Remove yaw rate/side/decel G sensor.
INSTALLATION
Note the following, and install in the reverse order of removal.
• Never drop or strike yaw rate/transverse/decel G sensor, because it has little endurance to impact. Never use a power tool.
Was this page helpful?