Air conditioner filter
Exploded View
LHD models

1. A/C unit assembly 2. Air conditioner filter 3. Filter cover
Removal and Installation (LHD models)
REMOVAL
1. Remove glove box assembly. Refer to IP-13, "Removal and Installation".2. Remove filter cover (1), and then remove air conditioner filter (2) from A/C unit assembly.
CAUTION:If the filter is deformed/damaged when removing, replace it with a new one. Deformed/damaged filter may deteriorate the dust collecting performance.

INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:When installing, handle the filter with extreme care to avoid deforming/damaging.
Removal and Installation (RHD models)
REMOVAL
NOTE:
When removing air conditioner filter, visually check the operation through glove box mask opening.
1. Open glove box lid. Remove glove box mask.
: Pawl

2. Remove filter cover according to the numerical order as shown in the figure, while putting a hand through bottom of glove box and pressing pawl (A) of filter cover.

3. Pull out air conditioner filter from A/C unit assembly according to the numerical order as shown in the figure. Remove air conditioner filter through bottom of glove box.

CAUTION:
If the filter is deformed/damaged when removing, replace it with a new one. Deformed/damaged filter may deteriorate the dust collecting performance.
INSTALLATION
NOTE:
When removing air conditioner filter, visually check the operation through glove box mask opening.
When installing, handle the filter with extreme care to avoid deforming/damaging.
Replacement
Replace Air conditioner filter.
Refer to VTL-20, "Air Conditioner Filter".