Ventilation System

Blower motor

In this manual: Ventilation System
Foreword — 1General information — 45Engine Mechanical MR16DDT — 61Engine Mechanical HR16DE — 52Engine Mechanical K9K — 46Engine Lubrication System MR16DDT — 18Engine Lubrication System HR16DE — 14Engine Lubrication System K9K — 11Engine Cooling System MR16DDT — 28Engine Cooling System HR16DE — 29Engine Cooling System K9K — 24Engine Control System MR16DDT — 163Engine Control System HR16DE — 115Engine Control System K9K — 129Fuel System MR16DDT — 13Fuel system HR16DE — 11Fuel system K9K — 12Exhaust system MR16DDT — 7Exhaust system HR16DE — 10Exhaust system K9K — 7Starting system — 24Accelerator control system — 6Clutch — 25Driveline transfer: TY21B — 77Driveline rear propeller Shaft: 3Fφ16-ETJ75 — 12Driveline rear final drive: RTVS — 31Transaxle & transmission 5MT: RS5F92R — 31Transaxle & transmission 6MT: RS6F94R — 30Transaxle & transmission CVT: RE0F10B — 93Transaxle & transmissioN CVT: RE0F11A — 103Front Axle MR16DDT — 18Front Axle HR16DE — 17Front Axle K9K — 17Rear Axle 2WD — 6Rear Axle 4WD — 13Front Suspension — 21Rear Suspension 2WD — 13Rear Suspension 4WD — 17Road Wheels & Tires — 6Brake System LHD — 24Brake System RHD — 24Parking Brake System — 8Brake Control System without ESP — 44Brake Control System with ESP — 63Steering System — 14Steering Control System — 27Seat Belt — 8SRS Airbag — 24SRS Airbag Control System — 93Ventilation System — 11Heater & Air Conditioning System HR16DE — 28Heater & Air Conditioning System MR16DDT — 28Heater & Air Conditioning Control System Type 1 — 49Heater & Air Conditioning Control System Type 2 — 51Heater & Air Conditioning Control System Type 3 — 32Heater & Air Conditioning Control System Type 4 — 40Heater & Air Conditioning Control System Type 5 — 21Interior — 16Instrument Panel — 10Seat — 18Door & Lock Type 1 — 83Door & Lock type 2 — 80Door & Lock type 3 — 65Door & Lock type 4 — 60Security Control System with intelligent key system — 82Security Control System without intelligent key system — 41Glass & Window System — 15Power Window Control System — 28Body Repair — 13Exterior — 20Mirrors — 26Exterior Lighting System Halogen type — 51Interior Lighting System — 24Wiper & Washer — 45Defogger — 31Horn — 4Power Outlet — 4Body Control System With intelligent key system — 21Body Control System Without intelligent key system — 23LAN system can fundamental — 6LAN system can — 31LAN System can system (type 1) — 1LAN System can system (type 2) — 1LAN System can system (type 3) — 1LAN System can system (type 4) — 1LAN System can system (type 5) — 1LAN System can system (type 6) — 1LAN System can system (type 7) — 2LAN System can system (type 8) — 1LAN System can system (type 9) — 1LAN System can system (type 10) — 1LAN System can system (type 11) — 1Power Control System IPDM E/R (with I-key) — 14Power Control System IPDM E/R (without I-key) — 14Power Control System Power distribution system — 25Charging System — 22Power Supply, Ground & Circuit Elements — 20Meter, Warning Lamp & Indicator — 33Warning Chime System — 22Audio, Visual & Navigation System Audio without navigation — 30Audio, Visual & Navigation System Audio with navigation — 33Audio, Visual & Navigation System NISSAN dynamic control system — 22Cruise Control System — 1Drive Mode System — 10Maintenance — 14
~2min read

Exploded View

2WD models

1. A/C unit assembly

1. A/C unit assembly 2. Fan control amp.*1
3. Blower fan resistor*2 4. Blower motor
5. Blower motor cover

• *1: Automatic air conditioner • *2: Manual air conditioner or Manual heater

4WD models

1. A/C unit assembly

1. A/C unit assembly 2. Blower fan resistor*1 3. Sub harness*1
4. Power transistor*2
5. Sub harness*2
6. Blower motor

• *1: Manual air conditioner • *2: Automatic air conditioner

Removal and Installation (LHD models)

WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes or more. • Always work from the side of air bag module. Never work in front of it.

• Never use the air tools or the electric tools for servicing.

REMOVAL

1. Remove glove box assembly. Refer to IP-13, "Removal and Installation".

2. Disconnect blower motor harness connector (1) and front passenger air bag module harness connector (2).

3. Remove fixing screws, and then remove blower motor cover. (2WD models

3. Remove fixing screws, and then remove blower motor cover. (2WD models only)
4. Remove front passenger air bag module. Refer to SR-19, "Removal and Installation".

5. Press flange holding hook (A), and then turn blower motor (1) clockwise.

6. Pull outside, and then remove blower motor.

6. Pull outside, and then remove blower motor.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:
• Never use the old mounting bolts after removal, replace with the new bolts. • Never damage the harness while installing. • If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunctioningparts, reset the memory using self-diagnosis or CONSULT-III. Refer to SRC-12, "On Board Diagnosis Function" or SRC-16, "CONSULT-III Function".

• After the work is completed, check that no system malfunction is detected by air bag warning lamp.

Removal and Installation (RHD models)

REMOVAL

1. Remove instrument lower panel. Refer to IP-13, "Removal and Installation". 2. Remove steering column upper cover and steering column lower cover. Refer to IP-13, "Removal and Installation". 3. Remove mounting nuts and harness connector from steering column assembly. Refer to ST-10, "Removal and Installation". 4. Move steering column assembly aside. 5. Disconnect blower motor connector.

6. Press flange holding hook (A), and then turn blower motor (1) clockwise.

7. Pull outside, and then remove blower motor.

7. Pull outside, and then remove blower motor.

INSTALLATION

Install in the reverse order of removal.