Power Supply, Ground & Circuit Elements
Battery
In this manual: Power Supply, Ground & Circuit Elements
~1min read
Exploded View
1 : Battery fix frame
:N·m (kg-m, in-lb)

Removal and Installation
REMOVAL
1. Disconnect the battery cable from the negative terminal.
CAUTION:When disconnecting, disconnect the battery cable from the negative terminal first. 2. Remove cover of battery positive terminal. 3. Disconnect the battery cable from the positive terminal. 4. Remove battery fix frame mounting nuts and battery fix frame.
5. Remove battery.
INSTALLATION
Install in the reverse order of removal.
• When connecting, connect the battery cable to the positive terminal first. • After connecting battery cables, ensure that they are tightly clamped to battery terminals for good contact. • Check battery terminal for poor connection caused by corrosion.Reset electronic systems as necessary. Refer to GI-54, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Required Procedure After Battery Disconnection".
Was this page helpful?