Power Supply, Ground & Circuit Elements
Battery terminal with fusible link
In this manual: Power Supply, Ground & Circuit Elements
~1min read
Exploded View
1 : Battery terminal with fusible link 2 : Harness connector
: N·m (kg-m, ft-lb)

Removal and Installation
REMOVAL
1. Disconnect the battery cable from the negative terminal. 2. Remove cover of battery positive terminal. 3. Remove harness mounting nut and battery terminal with fusible link mounting nut.4. Disconnect harness connector and remove battery terminal with fusible link.
INSTALLATION
Install in the reverse order of removal.
Was this page helpful?