Body Control System With intelligent key system
BCM
In this manual: Body Control System With intelligent key system
~1min read
Removal and Installation CAUTION:
Before replacing BCM, perform “READ CONFIGURATION” to save or print current vehicle specification.
• Be sure to perform “WRITE CONFIGURATION” when replacing BCM.
Before replacing BCM, perform “READ CONFIGURATION” to save or print current vehicle specification.
Refer to BCS-80, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Description".
REMOVAL (RHD MODELS)
1. Remove glove box assembly. Refer to IP-13, "Removal and Installation". 2. Remove harness clip. 3. Remove BCM mounting screws. 4. Remove BCM and disconnect the connectors.5. Remove relays and relay mounting bracket from BCM.
REMOVAL (LHD MODELS)
1. Remove instrument lower panel. Refer to IP-13, "Removal and Installation". 2. Remove harness clip. 3. Remove BCM mounting screws. 4. Remove BCM and disconnect the connectors.5. Remove relays and relay mounting bracket from BCM.
INSTALLATION
Install in the reverse order of removal.
CAUTION:• Be sure to perform “WRITE CONFIGURATION” when replacing BCM.
• Be sure to perform the system initialization (NATS) when replacing BCM. Refer to BCS-80, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Special Repair Requirement".
Was this page helpful?