Body alignment
Body Center Marks (RHD Models)
A mark is placed on each part of the body to indicate the vehicle center. When repairing the vehicle frame (members, pillars, etc.) damaged by an accident which it enables more accurate and effective repair by using these marks together with body alignment specifications.

: Vehicle front


Body Center Marks (LHD Models)
A mark is placed on each part of the body to indicate the vehicle center. When repairing the vehicle frame (members, pillars, etc.) damaged by an accident which it enables more accurate and effective repair by using these marks together with body alignment specifications.

: Vehicle front


Description
• All dimensions indicated in the figures are actual. • When using a tracking gauge, adjust both pointers to equal length. Then check the pointers and gauge itself to make sure there is no free play. • When a measuring tape is used, check to be sure there is no elongation, twisting or bending. • Measurements should be taken at the center of the mounting holes. • An asterisk (*) following the value at the measuring point indicates that the measuring point on the other side is symmetrically the same value. • The coordinates of the measurement points are the distances measured from the standard line of ″X″, ″Y″ and ″Z″.• ″Z″: Imaginary base line [200 mm (7.87 in) below datum line (″0Z″ at design plan)]

1. Vehicle center
2. Front axle center
3. Imaginary base line
Engine Compartment (2WD RHD Models)
MEASUREMENT
Dimensions marked with ″*″ indicate symmetrically identical dimensions on both the right and left hand of the vehicle.

Unit: mm (in)

MEASUREMENT POINTS

: Vehicle front

Engine Compartment (2WD LHD Models)
MEASUREMENT
Dimensions marked with ″*″ indicate symmetrically identical dimensions on both the right and left hand of the vehicle.

Unit: mm (in)

MEASUREMENT POINTS

: Vehicle front

Engine Compartment (4WD RHD Models)
MEASUREMENT
Dimensions marked with ″*″ indicate symmetrically identical dimensions on both the right and left hand of the vehicle.

Unit: mm (in)

MEASUREMENT POINTS

: Vehicle front

Engine Compartment (4WD LHD Models)
MEASUREMENT
Dimensions marked with ″*″ indicate symmetrically identical dimensions on both the right and left hand of the vehicle.

Unit: mm (in)

MEASUREMENT POINTS

: Vehicle front

Underbody (2WD Models)
MEASUREMENT
Dimensions marked with ″*″ indicate symmetrically identical dimensions on both the right and left hand of the vehicle.
The following figure shows a bottom view and a side view of the vehicle.

Unit: mm (in)
: Vehicle front
: Vehicle left side
MEASUREMENT POINTS

: Vehicle front


Underbody (4WD Models)
MEASUREMENT
Dimensions marked with ″*″ indicate symmetrically identical dimensions on both the right and left hand of the vehicle.
The following figure shows a bottom view and a side view of the vehicle.

Unit: mm (in)
: Vehicle front
: Vehicle left side
MEASUREMENT POINTS

: Vehicle front


Passenger Compartment
MEASUREMENT
Dimensions marked with ″*″ indicate symmetrically identical dimensions on both the right and left hand of the vehicle.

Unit: mm (in)
«The others»

MEASUREMENT POINTS

: Vehicle front

Rear Body
MEASUREMENT
Dimensions marked with ″*″ indicate symmetrically identical dimensions on both the right and left hand of the vehicle.

Unit: mm (in)
MEASUREMENT POINTS

: Vehicle front
