Door & Lock Type 1
Buzzer (combination meter)
In this manual: Door & Lock Type 1
~1min read
Component Function Check
1.CHECK FUNCTION 1. Select “INTELLIGENT KEY” of “BCM” using CONSULT-III. 2. Select “INSIDE BUZZER” in “ACTIVE TEST” mode.3. Check that the function operates normally according to the following conditions.

Is the inspection result normal? Yes >> Buzzer (combination meter) is OK.
No >> Refer to DLK-73, "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK METER BUZZER CIRCUITRefer to WCS-40, "Component Function Check".
Is the inspection result normal? Yes >> GO TO 2.
No >> Repair or replace the malfunctioning parts.
2.CHECK INTERMITTENT INCIDENTRefer to GI-42, "Intermittent Incident".
>> INSPECTION END
Was this page helpful?