Door & Lock Type 1
Intelligent key
In this manual: Door & Lock Type 1
~1min read
Component Function Check
1.CHECK FUNCTION 1. Select “INTELLIGENT KEY” of “BCM” using CONSULT-III. 2. Select “RKE OPE COUN1” in “DATA MONITOR” mode.3. Check that the function operates normally according to the following conditions.

Is the inspection result normal? YES >> Intelligent Key is OK.
NO >> Refer to DLK-91, "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK INTELLIGENT KEY BATTERYCheck by connecting a resistance (approximately 300 Ω) so that the current value becomes about 10 mA. Refer to DLK-193, "Removal and Installation".
Standard : Approx. 2.5 - 3.0 V
Is the measurement value within the specification? YES >> Replace Intelligent Key.
NO >> Replace Intelligent Key battery.

Was this page helpful?