Ecu diagnosis informatioN
VALUES ON THE DIAGNOSIS TOOL




*1: Means CVT fluid temperature. Convert numerical values for actual fluid temperature °C (°F). Refer to TM-128, "ATFTEMP COUNT Conversion Table".
TERMINAL LAYOUT

PHYSICAL VALUES



*1: This harness is not used.
*2: A circuit tester cannot be used to test this item.
Fail-safeThe TCM has an electrical fail-safe mode. In this mode TCM is operator even if there is an error in a main electronic control input/output signal circuit.
Description
When a malfunction is detected in each sensor, switch, solenoid or others, this function provides control to minimize reduction of drivability so that durability of transmission assembly can be acquired.


DTC Inspection Priority Chart
If some DTCs are displayed at the same time, perform inspections one by one based on the following priority chart.
NOTE:
If DTC “U1000” is displayed with other DTCs, first perform the trouble diagnosis for DTC “U1000”.
Refer to TM-195.

DTC Index NOTE
:
If DTC “U1000” is displayed with other DTCs, first perform the trouble diagnosis for DTC “U1000”.
Refer to TM-195.


*: These numbers are prescribed by ISO 15031-5.