Seat

Front seat (2WD)

In this manual: Seat
Foreword — 1General information — 45Engine Mechanical MR16DDT — 61Engine Mechanical HR16DE — 52Engine Mechanical K9K — 46Engine Lubrication System MR16DDT — 18Engine Lubrication System HR16DE — 14Engine Lubrication System K9K — 11Engine Cooling System MR16DDT — 28Engine Cooling System HR16DE — 29Engine Cooling System K9K — 24Engine Control System MR16DDT — 163Engine Control System HR16DE — 115Engine Control System K9K — 129Fuel System MR16DDT — 13Fuel system HR16DE — 11Fuel system K9K — 12Exhaust system MR16DDT — 7Exhaust system HR16DE — 10Exhaust system K9K — 7Starting system — 24Accelerator control system — 6Clutch — 25Driveline transfer: TY21B — 77Driveline rear propeller Shaft: 3Fφ16-ETJ75 — 12Driveline rear final drive: RTVS — 31Transaxle & transmission 5MT: RS5F92R — 31Transaxle & transmission 6MT: RS6F94R — 30Transaxle & transmission CVT: RE0F10B — 93Transaxle & transmissioN CVT: RE0F11A — 103Front Axle MR16DDT — 18Front Axle HR16DE — 17Front Axle K9K — 17Rear Axle 2WD — 6Rear Axle 4WD — 13Front Suspension — 21Rear Suspension 2WD — 13Rear Suspension 4WD — 17Road Wheels & Tires — 6Brake System LHD — 24Brake System RHD — 24Parking Brake System — 8Brake Control System without ESP — 44Brake Control System with ESP — 63Steering System — 14Steering Control System — 27Seat Belt — 8SRS Airbag — 24SRS Airbag Control System — 93Ventilation System — 11Heater & Air Conditioning System HR16DE — 28Heater & Air Conditioning System MR16DDT — 28Heater & Air Conditioning Control System Type 1 — 49Heater & Air Conditioning Control System Type 2 — 51Heater & Air Conditioning Control System Type 3 — 32Heater & Air Conditioning Control System Type 4 — 40Heater & Air Conditioning Control System Type 5 — 21Interior — 16Instrument Panel — 10Seat — 18Door & Lock Type 1 — 83Door & Lock type 2 — 80Door & Lock type 3 — 65Door & Lock type 4 — 60Security Control System with intelligent key system — 82Security Control System without intelligent key system — 41Glass & Window System — 15Power Window Control System — 28Body Repair — 13Exterior — 20Mirrors — 26Exterior Lighting System Halogen type — 51Interior Lighting System — 24Wiper & Washer — 45Defogger — 31Horn — 4Power Outlet — 4Body Control System With intelligent key system — 21Body Control System Without intelligent key system — 23LAN system can fundamental — 6LAN system can — 31LAN System can system (type 1) — 1LAN System can system (type 2) — 1LAN System can system (type 3) — 1LAN System can system (type 4) — 1LAN System can system (type 5) — 1LAN System can system (type 6) — 1LAN System can system (type 7) — 2LAN System can system (type 8) — 1LAN System can system (type 9) — 1LAN System can system (type 10) — 1LAN System can system (type 11) — 1Power Control System IPDM E/R (with I-key) — 14Power Control System IPDM E/R (without I-key) — 14Power Control System Power distribution system — 25Charging System — 22Power Supply, Ground & Circuit Elements — 20Meter, Warning Lamp & Indicator — 33Warning Chime System — 22Audio, Visual & Navigation System Audio without navigation — 30Audio, Visual & Navigation System Audio with navigation — 33Audio, Visual & Navigation System NISSAN dynamic control system — 22Cruise Control System — 1Drive Mode System — 10Maintenance — 14
~7min read

Exploded View

DRIVER SEAT

LHD models

1. Headrest

1. Headrest
2. Headrest holder (locked) 3. Headrest holder (free) 4. Seatback heater unit 5. Inner lower cover
6. Seatback trim
7. Seatback pad
8. Seat cushion inner finisher 9. Reclining device inner cover 10. Anchor bolt
11. Seat belt buckle
12. Seat cushion trim
13. Seat cushion pad
14. TORX bolt
15. Seat cushion silencer 16. Seat cushion heater unit 17. Seat cushion outer finisher 18. Lifter lever knob
19. Lifter lever knob cap 20. Reclining lever knob 21. Reclining device outer cover 22. Outer lower cover
23. Side air bag module 24. Seatback silencer
25. Seat frame & adjuster assembly

: Do not reuse: Pawl
: N·m (kg-m, in-lb): Do not reuse
: N·m (kg-m, ft-lb): N·m (kg-m, in-lb)
PASSENGER SEAT: N·m (kg-m, ft-lb)


PASSENGER SEAT

LHD models

1. Headrest

1. Headrest
2. Headrest holder (locked) 3. Headrest holder (free) 4. Seatback silencer
5. Side air bag module
6. TORX bolt
7. Reclining device outer cover 8. Seat cushion outer finisher 9. Reclining lever knob
10. Seat cushion heater unit 11. Seat cushion silencer 12. Seat cushion assembly 13. Anchor bolt
14. Seat belt buckle
15. Seat cushion inner finisher 16. Reclining device inner cover 17. Seatback pad
18. Seatback trim
19. Seatback heater unit 20. Seat frame & adjuster assembly

: Do not reuse: Pawl
: N·m (kg-m, in-lb): Do not reuse
: N·m (kg-m, ft-lb): N·m (kg-m, in-lb)
Removal and Installation: N·m (kg-m, ft-lb)


Removal and Installation

REMOVAL

CAUTION:
Before servicing, disconnect the battery cable from negative terminal or remove the fuse.
1. Remove headrest. 2. Set the seatback vertically. 3. Slide seat to the frontmost position. 4. Remove rear outer mounting TORX bolt. 5. Remove rear inner mounting TORX bolt. 6. Slide seat to the rearmost position. 7. Remove front outer mounting TORX bolt. 8. Remove front inner mounting TORX bolt.

9. Remove seat cushion lower harness connectors and harness fixing clamps.

CAUTION:
Before performing removal operation, check the installation position of harness connectors and harness fixing clamps.

10. Remove seat from the vehicle.

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.

INSTALLATION

Note the following items, and install in the reverse order of removal.

CAUTION:
• When removing and installing, use shop cloths to protect parts from damage.

• When installing, tighten mounting TORX bolts according to the numerical order (1, 2, 3, and 4 as shown in the figure), starting from front inner mounting TORX bolt.

• Always fix the harness fixing clamp in position.

• Always fix the harness fixing clamp in position.

Seatback : Disassembly and Assembly

DISASSEMBLY

1. Remove seatback retainer installed in the lower portion of seat cushion.

2. Remove harness installed in the lower portion of seat cushion.

1. Disconnect seatback heater unit harness connector (A).

(with heater seat only)
2. Remove seatback heater unit harness connector fixing clip (A) and harness fixing clamp (B). (with heater seat only) 3. Remove side air bag module harness connector fixing clip (C) and harness fixing clamp (D).

: Vehicle front


3. Open seatback fastener (A) and remove seatback retainer (B).

3. Open seatback fastener (A) and remove seatback retainer (B).

4. Remove side air bag module harness fixing clamps from seat frame &

4. Remove side air bag module harness fixing clamps from seat frame & adjuster assembly.

5. Use pincers, etc., to press up pawls as shown by the arrows in the figure, and remove headrest holder from seatback.

(front/rear and right/left)
6. Remove side air bag module mounting nuts.

6. Remove side air bag module mounting nuts.

7. Remove seatback trim, seatback pad, side air bag module, and seatback heater unit (with heater seat only) from seat frame & adjuster assembly.

CAUTION:
Never subject side air bag module to impact by dropping or hitting.

8. Separate the seatback trim and seatback pad.

1. Remove side air bag module from seatback pad.

CAUTION:
For handling of side air bag module, refer to SR-22, "Removal and Installation".

2. Remove hog rings, and separate the seatback trim and seatback pad.

CAUTION:
Before performing separating operation, check the installation position of hog rings.
9. Separate the seatback pad and seatback heater unit.

10. Remove seatback silencer from seat frame & adjuster assembly.

ASSEMBLY

Note the following, and assemble in the reverse order of disassembly.

CAUTION:
Always install the hog ring in position.

Seat cushion : Disassembly and Assembly

DISASSEMBLY

1. Remove seat cushion outer finisher.

1. Disengage pawls and remove lifter lever knob cap (1).

(Driver seat only)
2. Remove fixing screws and remove lifter lever knob (2).

(Driver seat only)

: Pawl


3. Disengage pawl using a screwdriver while pulling reclining

3. Disengage pawl using a screwdriver while pulling reclining lever knob. Slide reclining lever knob toward seat front and remove it.

: Pawl


4. Tilt seat toward seat front until fixing screw (A) of seat cushion

4. Tilt seat toward seat front until fixing screw (A) of seat cushion outer finisher (1) and reclining device outer cover (2) are visible. Remove fixing screw.

: Vehicle front


5. Pull seat cushion outer finisher toward seat front. Disengage pawls and

5. Pull seat cushion outer finisher toward seat front. Disengage pawls and clips. Slide seat cushion outer finisher toward seat front. Remove seat cushion outer finisher.

1.

1.

Seat cushion outer finisher (Driver seat)
2.

Seat cushion outer finisher (Passenger seat)

: Pawl: Clip
: Metal clip: Pawl
2. Remove harness installed in the lower portion of seat cushion.: Metal clip


2. Remove harness installed in the lower portion of seat cushion.

Driver seat 1. Disconnect seat cushion heater unit harness connector (A).

(with heater seat only)
2. Remove seat cushion heater unit harness connector fixing clip (B) and harness fixing clamp (C). (with heater seat only) 3. Remove seat belt buckle harness connector fixing clip (D) and harness fixing clamp (E).

: Vehicle front


Passenger seat

Passenger seat
1. Disconnect seat cushion heater unit harness connector (A).

(with heater seat only)
2. Remove seat cushion heater unit harness connector fixing clip (B) and harness fixing clamp (C). (with heater seat only) 3. Disconnect occupant detection unit harness connector (D).

4. Remove seat belt buckle harness connector fixing clip (E) and harness fixing clamp (F).

: Vehicle front


3. Remove seat cushion inner finisher.

3. Remove seat cushion inner finisher.

1. Remove harness fixing clamps of seat belt buckle installed on seat frame & adjuster assembly. 2. Remove seat belt buckle mounting anchor bolt, and then remove seat belt buckle from seat frame &adjuster assembly.

3. Tilt seat toward seat front until fixing screw (A) of seat cushion inner finisher (1) and reclining device inner cover (2) are visible. Remove fixing screw.

: Vehicle front


4. Remove fixing screws. Pull seat cushion inner finisher toward seat front.

4. Remove fixing screws. Pull seat cushion inner finisher toward seat front. Disengage pawls. Remove seat cushion inner finisher.

1.

1.

Seat cushion inner finisher (Driver seat)
2.

Seat cushion inner finisher (Passenger seat)

A : Screw

4. Remove seat cushion retainer from seat frame & adjuster assembly. Remove: Pawl


4. Remove seat cushion retainer from seat frame & adjuster assembly. Remove seat cushion trim, seat cushion pad, and seat cushion heater unit (with seat heater only).

5. Remove hog rings, and separate the seat cushion trim and seat cushion pad.

CAUTION:
Before performing separating operation, check the installation position of hog rings.
6. Separate the seat cushion pad and seat cushion heater unit. 7. Remove seat cushion silencer from seat frame & adjuster assembly. 8. Remove seatback trim and seatback pad from seat frame & adjuster assembly. Refer to SE-19, "SEATBACK : Disassembly and Assembly".

9. Remove reclining device cover.

Driver seat
• Pull reclining device outer cover toward seat inner. Disengage pawls. Remove reclining device outer cover.

• Remove fixing screw. Pull reclining device inner cover toward seat inner. Disengage clips. Remove reclining device inner cover.

Passenger seat
• Pull reclining device outer cover toward seat inner. Disengage pawls and metal clips. Remove reclining device outer cover.

• Pull reclining device inner cover toward seat inner. Disengage pawls and metal clips. Remove reclining device inner cover. 10. Remove following parts from seat frame & adjuster assembly. (driver seat only)
• Remove fixing screws. Pull outer lower cover toward seat inner and outer. Remove clips. Remove outer lower cover.

• Remove fixing screws. Pull inner lower cover toward seat inner. Disengage clip. Remove inner lower cover.

ASSEMBLY

Note the following, and assemble in the reverse order of disassembly.

CAUTION:
Always install the hog ring in position.