Seat

Rear seat (4WD)

In this manual: Seat
Foreword — 1General information — 45Engine Mechanical MR16DDT — 61Engine Mechanical HR16DE — 52Engine Mechanical K9K — 46Engine Lubrication System MR16DDT — 18Engine Lubrication System HR16DE — 14Engine Lubrication System K9K — 11Engine Cooling System MR16DDT — 28Engine Cooling System HR16DE — 29Engine Cooling System K9K — 24Engine Control System MR16DDT — 163Engine Control System HR16DE — 115Engine Control System K9K — 129Fuel System MR16DDT — 13Fuel system HR16DE — 11Fuel system K9K — 12Exhaust system MR16DDT — 7Exhaust system HR16DE — 10Exhaust system K9K — 7Starting system — 24Accelerator control system — 6Clutch — 25Driveline transfer: TY21B — 77Driveline rear propeller Shaft: 3Fφ16-ETJ75 — 12Driveline rear final drive: RTVS — 31Transaxle & transmission 5MT: RS5F92R — 31Transaxle & transmission 6MT: RS6F94R — 30Transaxle & transmission CVT: RE0F10B — 93Transaxle & transmissioN CVT: RE0F11A — 103Front Axle MR16DDT — 18Front Axle HR16DE — 17Front Axle K9K — 17Rear Axle 2WD — 6Rear Axle 4WD — 13Front Suspension — 21Rear Suspension 2WD — 13Rear Suspension 4WD — 17Road Wheels & Tires — 6Brake System LHD — 24Brake System RHD — 24Parking Brake System — 8Brake Control System without ESP — 44Brake Control System with ESP — 63Steering System — 14Steering Control System — 27Seat Belt — 8SRS Airbag — 24SRS Airbag Control System — 93Ventilation System — 11Heater & Air Conditioning System HR16DE — 28Heater & Air Conditioning System MR16DDT — 28Heater & Air Conditioning Control System Type 1 — 49Heater & Air Conditioning Control System Type 2 — 51Heater & Air Conditioning Control System Type 3 — 32Heater & Air Conditioning Control System Type 4 — 40Heater & Air Conditioning Control System Type 5 — 21Interior — 16Instrument Panel — 10Seat — 18Door & Lock Type 1 — 83Door & Lock type 2 — 80Door & Lock type 3 — 65Door & Lock type 4 — 60Security Control System with intelligent key system — 82Security Control System without intelligent key system — 41Glass & Window System — 15Power Window Control System — 28Body Repair — 13Exterior — 20Mirrors — 26Exterior Lighting System Halogen type — 51Interior Lighting System — 24Wiper & Washer — 45Defogger — 31Horn — 4Power Outlet — 4Body Control System With intelligent key system — 21Body Control System Without intelligent key system — 23LAN system can fundamental — 6LAN system can — 31LAN System can system (type 1) — 1LAN System can system (type 2) — 1LAN System can system (type 3) — 1LAN System can system (type 4) — 1LAN System can system (type 5) — 1LAN System can system (type 6) — 1LAN System can system (type 7) — 2LAN System can system (type 8) — 1LAN System can system (type 9) — 1LAN System can system (type 10) — 1LAN System can system (type 11) — 1Power Control System IPDM E/R (with I-key) — 14Power Control System IPDM E/R (without I-key) — 14Power Control System Power distribution system — 25Charging System — 22Power Supply, Ground & Circuit Elements — 20Meter, Warning Lamp & Indicator — 33Warning Chime System — 22Audio, Visual & Navigation System Audio without navigation — 30Audio, Visual & Navigation System Audio with navigation — 33Audio, Visual & Navigation System NISSAN dynamic control system — 22Cruise Control System — 1Drive Mode System — 10Maintenance — 14
~9min read

Exploded View

1. Seatback board RH

1. Seatback board RH 2. Headrest
3. Headrest holder (locked) 4. Headrest holder (free) 5. Seatback trim RH
6. Seatback pad RH
7. Seatback lock knob
8. Seatback lock knob finisher 9. Seatback lock assembly RH 10. Seat lock cover RH
11. Bush
12. Side hinge
13. Spacer
14. Lock washer
15. Striker RH
16. Seat cushion hook
17. Seat cushion pad
18. Seat cushion trim
19. Striker LH
20. Seatback lock assembly LH 21. Seat lock cover LH
22. Seatback pad LH
23. Seatback trim LH
24. Center headrest
25. Seatback board LH
26. Seatback silencer LH 27. Seatback silencer RH 28. Seatback tether cover 29. Center seat belt finisher 30. Center hinge
31. Seat belt buckle
32. Center seat belt
33. Seatback frame RH
34. Seatback frame LH

: Metal clip: Pawl
: N·m (kg-m, ft-lb): Metal clip
Seat cushion : Removal and Installation: N·m (kg-m, ft-lb)


Seat cushion : Removal and Installation

REMOVAL

1. Lift up seat cushion at a close position (B) of engaging portion (A) and disengage seat cushion hook.

: Vehicle front

CAUTION:: Vehicle front


CAUTION:
Seat cushion wire close to engaging portion deforms, if excessive force is applied to seat cushion front end when removing seat cushion.

To avoid the deformation, be careful to remove seat cushion while applying force to close position, as much as possible, of engaging portion.

2. Pull out seat belt buckle from seat cushion.

3. Remove seat cushion from the vehicle.

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.

INSTALLATION

Note the following item, and install in the reverse order of removal.

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.

Seat cushion : Disassembly and Assembly

DISASSEMBLY

Remove hog rings, and separate the seat cushion trim and seat cushion pad.

CAUTION:
Before performing separating operation, check the installation position of hog rings.

ASSEMBLY

Note the following item, and assemble in the reverse order of disassembly.

CAUTION:
Always install the hog ring in position.

Seatback : Removal and Installation

LH SIDE SEATBACK

Removal

CAUTION:
Remove seatback with seat cushion installed.
1. Temporarily move seat cushion to the position where center anchor of center seat belts can be removed. 2. Remove center anchor mounting bolt of center seat belt. Remove center anchor. 3. Return seat cushion to the normal position. 4. Unlock seatback lock assembly. Tilt seatback toward vehicle front. Remove headrests. 5. Fold seatback toward vehicle front.

6. Pull up seatback carpet (A). Remove mounting bolts (B) of seatback hinge portion.

7. Remove seatback from the vehicle.

7. Remove seatback from the vehicle.

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.

Installation
Note the following items, and install in the reverse order of removal.

CAUTION:
• When removing and installing, use shop cloths to protect parts from damage. • Install seat cushion to the vehicle, and then install seatback. • Temporarily tighten bolts, fold up seatback, check that lock and striker do not interfere, and then tighten bolts.

• When installing seatback, tighten mounting bolts according to the numerical order (1, 2, 3, and 4 as shown in the figure).

RH SIDE SEATBACK

RH SIDE SEATBACK

Removal

CAUTION:
Remove seatback with seat cushion installed.
1. Unlock seatback lock assembly. Tilt seatback toward vehicle front. Remove headrests. 2. Fold seatback toward vehicle front.

3. Pull up seatback carpet (A). Remove mounting bolts (B) of seatback hinge portion.

4. Remove seatback from the vehicle.

4. Remove seatback from the vehicle.

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.

Installation
Note the following items, and install in the reverse order of removal.

CAUTION:
• When removing and installing, use shop cloths to protect parts from damage. • Install seat cushion to the vehicle, and then install seatback. • Temporarily tighten bolts, fold up seatback, check that lock and striker do not interfere, and then tighten bolts.

• When installing seatback, tighten mounting bolts according to the numerical order (1, 2, 3, and 4 as shown in the figure).

Seatback : Disassembly and Assembly

Seatback : Disassembly and Assembly

DISASSEMBLY

LH side seatback
1. Remove headrest holder.

1. Pull seat lock cover in direction indicated by the arrow as shown in the figure. Remove seat lock cover.

: Metal clip


2. Pull tether cover in direction indicated by the arrow as

2. Pull tether cover in direction indicated by the arrow as shown in the figure. Remove tether cover.

: Pawl


3. Open seatback fastener (A) and remove seatback retainer

3. Open seatback fastener (A) and remove seatback retainer (B).

4. Slide and align the clips (B) to the holes on the seatback as

4. Slide and align the clips (B) to the holes on the seatback as shown in the figure, and then remove the seatback board (A).

5. Use pincers, etc., to press up pawls as shown by the arrows

5. Use pincers, etc., to press up pawls as shown by the arrows in the figure, and remove headrest holder from seatback.

(front/rear and right/left)
2. Remove seatback lock knob finisher.

2. Remove seatback lock knob finisher.

1. Rotate seatback lock knob counterclockwise. Remove seatback lock knob.

2. Push up seatback lock knob finisher while pressing pawls

2. Push up seatback lock knob finisher while pressing pawls indicated by arrows as shown in the figure. Remove seatback lock finisher from seatback.

CAUTION:
When installing seatback lock knob finisher, check front and rear orientation and be careful to install it normally.
3. Remove center seat belt finisher from seatback.

3. Remove center seat belt finisher from seatback.

Lift up front of center seat belt finisher. Disengage front pawls.

Pull center seat belt finisher toward seat front. Disengage rear pawls.

: Pawl


4. Remove seatback trim and seatback pad from seatback frame

4. Remove seatback trim and seatback pad from seatback frame 5. Remove hog rings, and separate the seatback trim and seatback pad.

CAUTION:
Before performing separating operation, check the installation position of hog rings.
6. Remove seatback silencer from seatback frame. 7. Remove seatback lock assembly mounting bolts, and then remove seatback lock assembly from seatback frame.

8. Remove center seat belt retractor from seatback frame.

Refer to SB-12, "SEAT BELT RETRACTOR : Removal and Installation".

RH side seatback
1. Remove headrest holder.

1. Pull seat lock cover in direction indicated by the arrow as shown in the figure. Remove seat lock cover.

: Metal clip


2. Pull tether cover in direction indicated by the arrow as

2. Pull tether cover in direction indicated by the arrow as shown in the figure. Remove tether cover.

: Pawl


3. Open seatback fastener (A) and remove seatback retainer

3. Open seatback fastener (A) and remove seatback retainer (B).

4. Slide and align the clips (B) to the holes on the seatback as

4. Slide and align the clips (B) to the holes on the seatback as shown in the figure, and then remove the seatback board (A).

5. Use pincers, etc., to press up pawls as shown by the arrows

5. Use pincers, etc., to press up pawls as shown by the arrows in the figure, and remove headrest holder from seatback.

(front/rear and right/left)
2. Remove seatback lock knob finisher.

2. Remove seatback lock knob finisher.

1. Rotate seatback lock knob counterclockwise. Remove seatback lock knob.

2. Push up seatback lock knob finisher while pressing pawls

2. Push up seatback lock knob finisher while pressing pawls indicated by arrows as shown in the figure. Remove seatback lock finisher from seatback.

CAUTION:
When installing seatback lock knob finisher, check front and rear orientation and be careful to install it normally.
3. Remove seatback trim and seatback pad from seatback frame.

3. Remove seatback trim and seatback pad from seatback frame.

4. Remove hog rings, and separate the seatback trim and seatback pad.

CAUTION:
Before performing separating operation, check the installation position of hog rings.
5. Remove seatback silencer from seatback frame.

6. Remove seatback lock assembly mounting bolts, and then remove seatback lock assembly from seatback frame.

INSTALLATION

Note the following, and assemble in the reverse order of disassembly.

CAUTION:
Always install the hog ring in position.

Seatback hinge : Removal and Installation

CENTER HINGE

Removal
1. Remove seatback LH and RH from the vehicle.

Refer to SE-43, "SEATBACK : Removal and Installation".

2. Remove seat cushion from the vehicle. Refer to SE-42, "SEAT CUSHION : Removal and Installation".

3. Remove center hinge mounting bolts, and then remove center hinge from the vehicle.

Installation
Note the following items, and install in the reverse order of removal.

CAUTION:
When installing center hinge, tighten mounting bolts to the specified torque according to the numerical order as shown in the figure
1. Temporarily tighten mounting bolt (1).

2. Tighten mounting bolts in numerical order (2 and 3 as shown in the figure) to the specified torque.

For the specified torque, refer to SE-41, "Exploded View".

: Vehicle front


SIDE HINGE

SIDE HINGE

Removal
1. Remove seatback from the vehicle. Refer to SE-43, "SEATBACK : Removal and Installation".

2. Remove side hinge mounting bolt, and then remove side hinge from luggage side lower finisher.

Installation
Installation is the reverse order of removal. Tighten bolts to the specified torque.

For the specified torque, refer to SE-41, "Exploded View".

Seatback striker : Removal and Installation

REMOVAL
1. Remove seatback LH and RH from the vehicle. Refer to SE-43, "SEATBACK : Removal and Installation". 2. Remove seat cushion from the vehicle. Refer to SE-42, "SEAT CUSHION : Removal and Installation". 3. Remove side hinge from the vehicle. Refer to SE-48, "SEATBACK HINGE : Removal and Installation". 4. Remove luggage side lower finisher from the vehicle. Refer to INT-31, "LUGGAGE SIDE LOWER FINISHER : Removal and Installation". 5. Remove outer anchor mounting anchor bolt, and then remove outer anchor.

6. Remove mounting bolts or nuts of striker, and then remove striker from the vehicle.

INSTALLATION

Note the following items, and install in the reverse order of removal.

CAUTION:
When installing striker, tighten mounting bolts or nuts to the specified torque according to the numerical order as shown in the figure.
1. Temporarily tighten mounting bolts in numerical order (1 and 2 as shown in the figure).

2. Tighten mounting bolts or nuts to the specified torque in numerical order (3, 4, and 5 as shown in the figure).

For the specified torque, refer to SE-41, "Exploded View".

: Vehicle front


Heated seat switch