Power Window Control System

Power window motor

In this manual: Power Window Control System
Foreword — 1General information — 45Engine Mechanical MR16DDT — 61Engine Mechanical HR16DE — 52Engine Mechanical K9K — 46Engine Lubrication System MR16DDT — 18Engine Lubrication System HR16DE — 14Engine Lubrication System K9K — 11Engine Cooling System MR16DDT — 28Engine Cooling System HR16DE — 29Engine Cooling System K9K — 24Engine Control System MR16DDT — 163Engine Control System HR16DE — 115Engine Control System K9K — 129Fuel System MR16DDT — 13Fuel system HR16DE — 11Fuel system K9K — 12Exhaust system MR16DDT — 7Exhaust system HR16DE — 10Exhaust system K9K — 7Starting system — 24Accelerator control system — 6Clutch — 25Driveline transfer: TY21B — 77Driveline rear propeller Shaft: 3Fφ16-ETJ75 — 12Driveline rear final drive: RTVS — 31Transaxle & transmission 5MT: RS5F92R — 31Transaxle & transmission 6MT: RS6F94R — 30Transaxle & transmission CVT: RE0F10B — 93Transaxle & transmissioN CVT: RE0F11A — 103Front Axle MR16DDT — 18Front Axle HR16DE — 17Front Axle K9K — 17Rear Axle 2WD — 6Rear Axle 4WD — 13Front Suspension — 21Rear Suspension 2WD — 13Rear Suspension 4WD — 17Road Wheels & Tires — 6Brake System LHD — 24Brake System RHD — 24Parking Brake System — 8Brake Control System without ESP — 44Brake Control System with ESP — 63Steering System — 14Steering Control System — 27Seat Belt — 8SRS Airbag — 24SRS Airbag Control System — 93Ventilation System — 11Heater & Air Conditioning System HR16DE — 28Heater & Air Conditioning System MR16DDT — 28Heater & Air Conditioning Control System Type 1 — 49Heater & Air Conditioning Control System Type 2 — 51Heater & Air Conditioning Control System Type 3 — 32Heater & Air Conditioning Control System Type 4 — 40Heater & Air Conditioning Control System Type 5 — 21Interior — 16Instrument Panel — 10Seat — 18Door & Lock Type 1 — 83Door & Lock type 2 — 80Door & Lock type 3 — 65Door & Lock type 4 — 60Security Control System with intelligent key system — 82Security Control System without intelligent key system — 41Glass & Window System — 15Power Window Control System — 28Body Repair — 13Exterior — 20Mirrors — 26Exterior Lighting System Halogen type — 51Interior Lighting System — 24Wiper & Washer — 45Defogger — 31Horn — 4Power Outlet — 4Body Control System With intelligent key system — 21Body Control System Without intelligent key system — 23LAN system can fundamental — 6LAN system can — 31LAN System can system (type 1) — 1LAN System can system (type 2) — 1LAN System can system (type 3) — 1LAN System can system (type 4) — 1LAN System can system (type 5) — 1LAN System can system (type 6) — 1LAN System can system (type 7) — 2LAN System can system (type 8) — 1LAN System can system (type 9) — 1LAN System can system (type 10) — 1LAN System can system (type 11) — 1Power Control System IPDM E/R (with I-key) — 14Power Control System IPDM E/R (without I-key) — 14Power Control System Power distribution system — 25Charging System — 22Power Supply, Ground & Circuit Elements — 20Meter, Warning Lamp & Indicator — 33Warning Chime System — 22Audio, Visual & Navigation System Audio without navigation — 30Audio, Visual & Navigation System Audio with navigation — 33Audio, Visual & Navigation System NISSAN dynamic control system — 22Cruise Control System — 1Drive Mode System — 10Maintenance — 14
~4min read

DRIVER SIDE

DRIVER SIDE : Component Function Check 1. CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE) OPERATION

Check front power window motor (driver side) operation with power window main switch.

Is the inspection result normal? YES >> INSPECTION END

NO >> Refer to PWC-26, "DRIVER SIDE : Diagnosis Procedure".

DRIVER SIDE : Diagnosis Procedure 1.CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE) INPUT SIGNAL 1. Turn ignition switch OFF. 2. Disconnect front power window motor (driver side) connector. 3. Turn ignition switch ON.

4. Check voltage between front power window motor (driver side) harness connector and ground.

(): RHD models

(): RHD models Is the inspection result normal? YES >> Replace front power window motor (driver side).

NO >> GO TO 2.

2.CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE) CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect power window main switch connector.

3. Check continuity between front power window motor (driver side) harness connector and power window main switch harness connector.

4. Check continuity between front power window motor (driver side) harness

4. Check continuity between front power window motor (driver side) harness connector and ground.

(): RHD models

(): RHD models

Is the inspection result normal? YES >> Replace power window main switch.

NO >> Repair or replace harness.

Passenger side

PASSENGER SIDE : Component Function Check 1. CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) OPERATION

Check front power window motor (passenger side) operation with power window main switch or front power window switch (passenger side).

Is the inspection result normal? YES >> INSPECTION END

NO >> Refer to PWC-27, "PASSENGER SIDE : Diagnosis Procedure".

PASSENGER SIDE : Diagnosis Procedure 1.CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) INPUT SIGNAL 1. Turn ignition switch OFF. 2. Disconnect front power window motor (passenger side) connector. 3. Turn ignition switch ON.

4. Check voltage between front power window motor (passenger side) harness connector and ground.

(): RHD models

(): RHD models

Is the inspection result normal? YES >> Replace front power window motor (passenger side).

NO >> GO TO 2.

2.CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect front power window switch (passenger side) connector.

3. Check continuity between front power window motor (passenger side) harness connector and front power window switch (passenger side) harness connector.

4. Check continuity between front power window motor (passenger side) harness

4. Check continuity between front power window motor (passenger side) harness connector and ground.

(): RHD models

(): RHD models

Is the inspection result normal? YES >> Replace front power window switch (passenger side).

NO >> Repair or replace harness.

Rear LH

REAR LH : Component Function Check 1.CHECK REAR POWER WINDOW MOTOR LH OPERATION

Check rear power window motor LH operation with power window main switch or rear power window switch LH.

Is the inspection result normal? YES >> INSPECTION END

NO >> Refer to PWC-28, "REAR LH : Diagnosis Procedure".

REAR LH : Diagnosis Procedure 1.CHECK REAR POWER WINDOW MOTOR LH INPUT SIGNAL 1. Turn ignition switch OFF. 2. Disconnect rear power window motor LH connector. 3. Turn ignition switch ON.

4. Check voltage between rear power window motor LH harness connector and ground.

Is the inspection result normal?

Is the inspection result normal? YES >> Replace rear power window motor LH.

NO >> GO TO 2.

2.CHECK REAR POWER WINDOW MOTOR LH CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect rear power window switch LH connector.

3. Check continuity between rear power window motor LH harness connector and rear power window switch LH harness connector.

4. Check continuity between rear power window motor LH connector and ground.

4. Check continuity between rear power window motor LH connector and ground.

Is the inspection result normal?

Is the inspection result normal? YES >> Replace rear power window switch LH.

NO >> Repair or replace harness.

Rear RH

REAR RH : Component Function Check 1. CHECK REAR POWER WINDOW MOTOR RH OPERATION

Check rear power window motor RH operation with power window main switch or rear power window switch RH.

Is the inspection result normal? YES >> INSPECTION END

NO >> Refer to PWC-29, "REAR RH : Diagnosis Procedure".

REAR RH : Diagnosis Procedure 1.CHECK REAR POWER WINDOW MOTOR RH INPUT SIGNAL 1. Turn ignition switch OFF. 2. Disconnect rear power window motor RH connector. 3. Turn ignition switch ON.

4. Check voltage between rear power window motor RH harness connector and ground.

Is the inspection result normal?

Is the inspection result normal? YES >> Replace rear power window motor RH.

NO >> GO TO 2.

2.CHECK REAR POWER WINDOW MOTOR RH CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect rear power window switch RH connector.

3. Check continuity between rear power window motor RH harness connector and rear power window switch RH harness connector.

4. Check continuity between rear power window motor RH harness connector and

4. Check continuity between rear power window motor RH harness connector and ground.

Is the inspection result normal?

Is the inspection result normal? YES >> Replace rear power window switch RH.

NO >> Repair or replace harness.