Rear power window switch
Component Function Check
1. CHECK REAR POWER WINDOW SWITCH FUNCTIONCheck rear power window motor operation with rear power window switch.
Is the inspection result normal? YES >> INSPECTION END
NO >> Refer to PWC-24, "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK REAR POWER WINDOW SWITCH INPUT SIGNAL 1. Turn ignition switch OFF. 2. Disconnect rear power window switch connector. 3. Turn ignition switch ON.4. Check voltage between rear power window switch harness connector and ground.

Is the inspection result normal? YES >> GO TO 3.
NO >> GO TO 2.
2.CHECK REAR POWER WINDOW SWITCH CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect power window main switch connector.3. Check continuity between rear power window switch harness connector and power window main switch harness connector.

(): RHD models
4. Check continuity between rear power window switch harness connector and ground.

Is the inspection result normal? YES >> Replace power window main switch.
NO >> Repair or replace harness.
3.CHECK REAR POWER WINDOW SWITCHCheck rear power window switch.
Refer to PWC-25, "Component Inspection".
Is the inspection result normal? YES >> GO TO 4.
NO >> Replace rear power window switch.
4.CHECK INTERMITTENT INCIDENTRefer to GI-42, "Intermittent Incident".
>> INSPECTION END
Component Inspection
1.CHECK REAR POWER WINDOW SWITCH 1. Turn ignition switch OFF. 2. Disconnect rear power window switch connector.3. Check rear power window switch terminals under the following conditions.

Is the inspection result normal? YES >> INSPECTION END
NO >> Replace rear power window switch.